background image

VACUUM FUNCTION

Dry Messes 
Ensure that the filter is fitted into the Dust Cup and that the Dust Cup is securely clipped onto the Main Unit.
Once the unit has been fully assembled, plug the Power Cord into a grounded electrical outlet.

Turning the unit ON:
Red Light will turn on indicating that the power is on. Power Switch button is still in the OFF (0) position. Move 
the Power Switch to the “Vac” setting. 
Hold the handle and proceed with vacuum cleaning by moving the suction opening of the H2O™ PowerX™ 
Steam & Vacuum Cleaner Head in a close proximity over the area or object to be vacuumed in an even and 
slow manner.
When the Storage Tank has reached its maximum capacity (indicated by Max Fill Line) stop and slide the Power 
Switch “Off” and then empty the Storage Tank (see Emptying the Storage Tank). 

Wet Messes
The H2O™ PowerX™ Steam & Vacuum Cleaner is designed to lift liquids and clean soiled areas from carpets, upholstery and hard surfaces. 
Once the unit has been fully assembled, plug the Power Cord into a grounded electrical outlet.

Turning the unit ON:
Red Light will turn on indicating that the power is on. Power Switch button is still in the OFF (0) position. Move 
the Power Switch to the “Vac” setting. 
Hold the handle and proceed with vacuum cleaning by moving the suction opening of the H2O™ PowerX™ 
Steam & Vacuum Cleaner Head in a close proximity over the area or object to be vacuumed in an even and slow 
manner.
When the Storage Tank has reached its maximum capacity (indicated by Max Fill Line) stop and slide the Power 
Switch “Off” and then empty the Storage Tank (see Emptying the Storage Tank).

Tip: The Microfiber Cloth should only be used for Steam Cleaning functions and should be removed prior to vacuuming and placed back on 
for Steam Cleaning. 

 

 

 

   It is recommended to empty the Storage Tank of all liquid or dirt and debris when switching from a dry mess to a 

 

 

 

   wet mess or vice versa. The Storage Tank has a 50ml maximum for Wet messes, vacuuming past this indicated  

 

 

 

 

   mark may cause leakage.

 

 

 

      

Before cleaning upholstery, check the manufacturer’s tag on the furniture to see if it is safe to proceed. 

 

 

 

      When using the H2O™ PowerX™ Steam & Vacuum Cleaner for wet messes keep the unit between the positions in 

Fig.1. Once liquid has been vacuumed into the Storage Tank, DO NOT turn the unit in an upright position or tilt it backwards or lay it on its 
side (as shown in Fig. 2, 3, 4) as liquid may leak from the Storage Tank. 

 

 

 

      While using the H2O™ PowerX™ Steam & Vacuum Cleaner for wet messes, if any liquid leaks from the Storage  

 

 

 

 

      Tank, immediately turn the unit off and investigate the cause of the problem. (see Disposing of Dirt 

 

 

 

      and Liquid)

            

How to Use Your 

H2O™ PowerX™ Steam & Vacuum Cleaner 

!

WARNING

NOTE

!

WARNING

!

WARNING

Disposing of Dirt and Liquid:
For best performance and to maintain suction power, it is important to empty and clean the Storage Tank, Plastic Filer and Fabric Filter after 
use. The Storage Tank is transparent, allowing you to see how much dirt and liquid has accumulated inside the Storage Tank. Dirt should 
be emptied when it has reached a level close to the Plastic Filter. Liquid should be emptied when the volume reaches the “MAX” level line 
(50ml).

                              

It is recommended to empty the Storage Tank of all liquid or dirt and debris when switching from a dry mess to a wet 

 

 

 

     mess or vice versa.

    
 

 

 

     Do not accumulate so much dirt inside the Storage Tank that the Plastic Filter becomes covered or immersed. 

Tip: Regular cleaning of the Storage Tank, Plastic and Fabric Filters will ensure efficient performance and increased lifespan of your H2O™ 
PowerX™ Steam & Vacuum Cleaner.

Emptying the Storage Tank:
Slide the Power Switch to “OFF”.
Disconnect the Main Unit Head or any other accessory from the Storage Tank.
Unlatch the Storage Tank Lock located on the backside of the Main Unit and remove the Metal Pin from the underside of the Storage Tank 
(Fig. 1&2).
Remove the Storage Tank from the Main Unit (Fig. 3).
Pull the Filter Plate (with Plastic and Fabric Filters) out from the Storage Tank (Fig. 4).
Empty dust and debris from the Dust Cup into a waste container (Fig. 5). 

Take care when disconnecting the Dust Tank from the Main Body to ensure that the Filter Plate does not fall out.

How to Use Your 

H2O™ PowerX™ Steam & Vacuum Cleaner 

!

WARNING

NOTE

IMPORTANT

2

3

4

4

5

1

2

3

1

  9

  10

HIGH

LOW

OFF

VAC

HIGH

LOW

OFF

VAC

Summary of Contents for H2OPowerX KB015











Reviews: