5
12
HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS
35. This appliance is intended to be used in household and similar applications such as: staff kitchen
areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and
other residential type environments; bed and breakfast type environments.
36. This appliance is for indoor use only. Do not expose the appliance to outdoor weather.
37. Do not use any accessories or attachments with this appliance other than those recommended
by the supplier, as unapproved attachments may cause fire, electric shock or injury.
38. The blades in the Quad Blade Blending Attachment in this appliance are not intended for processing
hard or dry substances as this will dull them.
39. The pulse function is not meant to be used continuously for a prolonged time. It is meant to be
used for a second or two at a time. Improper use of the pulse function can damage this appliance.
40. The manufacturer and distributor are not responsible for any damage caused to this appliance due
to incorrect use.
41. Before placing food in the appliance for processing make sure all wrappers have been removed
(i.e., paper, aluminum foil or plastic) and check the jar/container for foreign objects.
42. Before turning the appliance on, make sure all parts are properly assembled.
43. Avoid contact with moving parts while the appliance is in use to prevent personal injury or damage
to the appliance.
44. To avoid injury, always follow the instructions provided in this User’s Manual when handling the
sharp blades of the attachments.
45. The metal blades are extremely sharp and should be handled with extreme care. Always hold the
blade attachments by their plastic base, away from the sharp edges of the blades, both when
handling and cleaning.
46. Never put your fingers or other objects into the unit opening while it is in operation. If food becomes
lodged in the opening, a scraper may be used, but must be used only when the unit is not running.
When this method is not possible, turn the unit off and disassemble to remove the remaining food.
47. To reduce the risk of injury, never place the blade attachment on the base without the jar/container
and any applicable lids being properly attached.
48. Make sure the jar/container is fastened tightly onto the blade attachment before turning it on.
The unit will not work if the jar/container is not attached properly.
49. Switch off the appliance and disconnect from the power supply before removing the jar/container
from the unit base, changing accessories or getting near moving parts.
50. Always disconnect the appliance from the power supply if it is left unattended and before assembling,
disassembling or cleaning.
51. Warning: Potential injury from misuse. Care shall be taken when handling the sharp cutting blades,
while emptying the jar/container and during cleaning.
52. Never process hot foods and/or liquids, such as soups, with the FlavorFresh™ Whole Food Vacuum
Juicer. Always wait for the food and/or liquid to cool before using the FlavorFresh™ unit to process it.
53. Never run the appliance if it is empty.
54. Do not overfill any of the processing containers past their suggested maximum amount.
55. Take special care when the Vacuum Pump is attached to the jar and avoid liquids (or food) coming
into contact with the inside of the Vacuum Pump. That is why it is very important not to overfill the jar
or shake it while the Vacuum Pump is attached.
56. Always observe the appliance carefully when it is turned on.
57. After use, make sure all the parts that were used are cleaned properly.
58. To avoid personal injury, care must be taken when cleaning any of the attachments that have sharp
blades.
59. None of the attachments and their corresponding lids are freezer, microwave, or dishwasher safe.
Safety Cautions and Warnings
Instructions For Use
8. When the ingredients are processed thoroughly, remove the Grinding Jar from the Motor Base by holding on
to the Motor Base with one hand and turning it in a counter-clockwise direction with the other, then lift (Figure 17).
Doing this will move the arrow on the blade attachment, from being aligned with the ‘ON’ marking, back to being
aligned with the ‘OFF/PULSE’ marking on the Motor Base.
9. Unplug the unit from the power source and enjoy your ground up ingredients.
10. Just like with the To Go Continuer, the Grinder Jar can be used to store the finished product in vacuum-like
conditions. To do this, remove the blade attachment and replace it with the Flat Lid with Vacuum Valve. Then,
use the Vacuum Pump on the Flat Lid with Vacuum Valve to remove oxygen and create vacuum-like storage
conditions (Figure 18).
THE BLADES ARE VERY SHARP. TO AVOID INJURY, ALWAYS HANDLE WITH
EXTREME CARE.
!
WARNING
Figure 17
Figure 18
MAX
MAX
