1
2
1
1.
2
Here’s how to properly connect
the tube to the G3 cylinder.
2
5
51
Using the Mega Cyborg Hand
TROUBLESHOOTING
Push the piston all the way into the G3 cylinder so
that no excess air remains.
Connect
the tube.
6
2
1
1
3
4
Partially submerge
the G1 cylinder in
water and push the
piston completely
into the cylinder.
Hold the tube under
water and push the
piston all the way
into the cylinder.
Pull the piston out of
the cylinder again. If
there is still air in the
cylinder or tube, repeat
step .
Pull out
Connect
Repeat steps and
to fill the
cylinder completely
with water.
1
Does the thumb’s hydraulic
system leak or is there an
air pocket in it? Then do the
following:
G2
Cylinder
G3
Cylinder
G3
Cylinder
2
5
