2
3
6
1
4
Partially submerge
the G1 cylinder in
water and push the
piston completely
into the cylinder.
Hold the tube under
water and push the
piston all the way
into the cylinder.
Pull out
Connect
Pull the piston out of
the cylinder. Repeat
steps and
until the cylinder
is completely filled
with water.
1
3
2
1
3
2
Here’s how to properly connect
the tube to the G3 cylinder.
Pull the piston out of
the cylinder again.
If there is still air in
the cylinder or tube,
repeat step .
5
5
3
2
1
2
49
Using the Mega Cyborg Hand
Do the fingers’ hydraulic systems leak or are there air pockets in them? Then do the following:
Push the piston all the way into the G3 cylinder so
that no excess air remains.
Connect the tube.
G1
Cylinder
G3
Cylinder
G3
Cylinder
