Thales FMGS, Pilot'S Manual

Page: 461 / 703

MULTI PHASE
NAVIGATION management & monitoring 13
PILOTS NAVAIDS [2R]
Enables creation, review and deletion of
pilot-defined NAVAIDS.
From DATA page 2/2:
PILOTS NAVAIDS [2R] .. Press
Logic for display is same as PILOT
WAYPOINTS: if no PILOTS NAVAID
exists, NEW NAVAID page is displayed;
otherwise the first stored navaid in the
list is displayed.
To create a NAVAID:
If NEW NAVAID page is not shown
NEW NAVAID [5R]......... Press
NAVAID may be created by filling:
− IDENT [1L], 4 letters and/or digits are
available for designation,
− CLASS, may be any of the following:
VOR, DME, LOC, ILS, NDB, VOR TAC,
VOR DME, MLS, TACAN.
ILS DME, MLS DME, ILS TAC and non collocated navaids cannot be
created.
NEW NAVAID
IDENT
____
CLASS
______
LAT/LONG
____.__/_____.__
RETURN>
STORED NAVAID 1/1
IDENT
XYZ
CLASS
NDB
LAT/LONG
4500.0N/00000.0E
FREQ
1234.5
NEW
NAVAID>
DELETE ALL}
Once these fields are completed, boxes are displayed for the required
information to be inserted.
Required data vary for the type of navaid to be entered.
Fields appear step by step during data insertion.
All fields must be entered for STORE prompt to appear.
Notes:
− ILS and MLS navaids require defined RWY. If not, when RWY IDENT
is filled, NEW RUNWAY page is displayed to be completed.
− When a new navaid has been partially entered and class is changed,
all fields are erased except the IDENT and LAT/LONG. The
appropriate fields for the new navaid class are displayed.
− FIG of MERIT: If nothing is entered, two is assumed when this LSK is
pressed. Does not exist for NDB, LOC, ILS or MLS.
− See also NAVAIDS pages described in NAV DATA BASE sub-chapter
above.
If twenty NAVAIDS have already been stored and NEW NAVAID prompt
is pressed, "LIST OF 20 IN USE" s-pad msg (white) is triggered.
Logic for deletion of stored navaids, all or individually, and associated
scratchpad messages is identical that for stored waypoints.
AIRBUS A318/319/320/321
© THALES AVIONICS S.A.
J43126AA 00