11.3 Software Connection configuration :
Click “Setting” at first, click “Serial Port Setting” secondly, then serial port number and baud rate could be set. As below:
Remark : If workable port of the computer is COM 2 or COM 3 .customer should set the serial port as COM2 or COM 3.
Means customer should set the serial port as the real workable port according to their computer. Press OK after setting .
11.4 Parameters Settings:
Click “Setting”, and then click “Parameters Setting”, controller parameters could be set from your PC. Just like:
Press “Save ” after setting , Or customer can press “ One Key Recover” if he wants to reset to factory defaults
20