TFA Xeno 35.1111.IT, Instruction Manual

Page: 35 / 146

34
To wall mount:
1. Fix a screw (not supplied) into the
desired wall, leaving the head
extended out by about 5mm.
2. Place the weather station onto the
screw, using the hanging hole on the
backside. Gently pull the weather
station down to lock the screw into
place.
Free standing:
With the detachable stand, the weather
station can be placed onto any flat surface.
POSITIONING THE THERMO-HYGRO
TRANSMITTER
Mounting at a sheltered place. Avoid direct
rain and sunshine.
The thermo-hygro transmitter can be placed
onto any flat surface or wall mount using the
bracket which doubles as a stand or wall
mount base.
To wall mount:
1. Secure the bracket onto a desired wall
using the screws and plastic anchors.
2. Clip the transmitter onto the bracket.
Note:
Before permanently fixing the thermo-hygro to
the wall base, pace all units in the desired
locations to check that the outdoor temperature
and humidity readings are receivable. In event that the
signal is not received, relocate the thermo-hygro
transmitter or the weather station slightly as this may help
the signal reception.