39
INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The weather station uses 2 x AA, IEC LR6, 1.5V batteries. To
install and replace the batteries, please follow the steps below:
1.
Remove the cover at the back of the weather station.
2.
Insert batteries observing the correct polarity (see
marking).
3.
Replace compartment cover.
Battery replacement
•
Replace the batteries when the battery symbol of the weather station appears above the
humidity display.
•
When the batteries of the transmitter are used up, the low battery icon appears on the upper
display, near the outdoor temperature display.
Note:
In the event of changing batteries in any of the units, all units need to be reset by following the
setting up procedures. This is due to a random security code assigned by the transmitter at start-