10
ScanTemp 440 – Infrared Thermometer
Infrared Function
ScanTemp 440 is supplied with a default
emissivity of 0.95.
→
Press Mode key
⑤
for scrolling more display function as
follows.
➞
ScanTemp will automatically shut off if left idle for more
than 60 sec, unless in PRB mode.
Thermocouple Probe Scan Function:
➞
Press the mode key
⑧
until PRB appears: on the LCD.
➞
This mode can only be reference when thermometer
probe is connected.
Connect the thermocouple with Scan-
Temp 440’s thermocouple socket
⑩
and put the probe in or on the target,
the temperature will be displayed beside
the ”PRB” icon.
➞
The measurement range: -64 to +1400 °C.
➞
ScanTemp 440 will automatically shut off if left idle for
more than 12 min in PRB mode.
After measure high temp, the probe may remain HOT
for a while.
11
ScanTemp 440 – Infrared Thermometer
Key pad:
Other Function:
Battery:
The ScanTemp440 incorporates visual low battery indica-
tion as follows:
When the ‘Low Battery’ icon indicates the battery is low,
the battery should be replaced immediately with two
AAA, 1.5V batteries.
Please note: It is important to turn
the instrument off before replacing the battery other-
wise the ScanTemp440 may malfunction.
Dispose of used battery promptly and keep away from
children.
Press emissivity key
①
key to adjust the emissivity.
The emissivity can be changed from 0.10 to 1.00.
Zum Messen betätigen Sie die Taste Messen
⑨
.
Keep press Mode key
⑤
key
for the Maximum
(MAX), Minimum (MIN), Different between
MAX and MIN (DIF) and Average (AVG) readings
during the last measurement period.
Press Down key
②
or Up key to change the High
Alarm (HAL) or Lo Alarm (LAL). For example:
When the reading 27 °C < LAL 27.1 °C, the Low
icon will flash and you will hear a beep sound.
The measurement range: -33 .. +500 °C.
Press Lock key for infrared
LOCK mode
ON/OFF.
Press °C/°F key for
°C
or
°F transferred.
Press Lock key for
Backlight function
ON/OFF.
Press °C/°F key for
Laser function
ON/OFF.
In Default,
Max, Min,
DIF, AVG,
PRB mode:
In all modes:
First
hold on
the Meas.
key
⑨
Battery OK
Measurements
are possible
Battery Low
Battery needs to
be replaced,
measurements are
still possible
Battery Exhausted
Measurements are
not possible
DE Anl. 5020-0504/SCANTEMP 440 11.01.2005 15:18 Uhr Seite 6
