Emissivity
Most organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre -set in the
unit). Inaccurate readings will result from measuring shiny or polished metal surfaces. To
compensate, cover the surface to be measured with masking tape or flat black paint. Allow time for
the tape to reach the same temperature as the the material underneath it. Measur e the temperature
of the tape or painted surface.
Maintenance
Lens Cleaning: Blow off loose particles using clean compressed air. Gently brush remaining debris
away with a camel’s hair brush. Carefully wipe the surface with a moist cotton swab. The swab may
be moistened with water. NOTE: DO NOT use solvents to clean the plastic lens.
Case Cleaning: Use soap and water on a damp sponage or soft cloth. NOTE: DO NOT submerge the
unit in water.
Troubleshooting
Code
Problem
Action
---(on display)
Target temperature is over
Select target within specifications
or under range
Battery icon
Possible low
Check and/or replace
Appears
battery
battery
Blank display
Possilbe dead battery
Check and/or replace
battery
Laser doesn’t work
Low or dead battery
Replace battery
CE=Certification
This instrument conforms to the following standards:
•
EN50081-1:1992 (Electromagnetic Emissions)
•
EN50082-1:1992 (Elektromagnetic Susceptibility)
Tests were conducted using a frequency range of 27-500 MHz with the instrument in three
orientations. The average error for the three orientations is 4,8°C (+8,6°F) at 3 v/m throughout the
spectrum. However, between
190 MHz and
500 MHz at 3 v/m, the instrument may not meet ist stated
accuracy.
Warranty
The Company warrants this product to be free from defects in material and workmanship under normal use and
service for a period of one year from date of purchase, except as hereinafter provided. This warranty extends only
to the original purchaser.
This warranty shall not apply to batteries. The warranty shall not apply to any product which has been subject to
misuse, neglect, accident, or abnormal conditions of operation or storage. In the event of failure under warranty,
return this product to the distributor or retailer from whom it was purchased for replacement or repair. Purchaser’s
excludsive remedy under warranty shall be replacement, repair, or refund of the purchase price.
The foregoing warranty is in lieu of all other warranties, expressed or implied, including but not limited to any
implied warranty of merchantability, fitness, or adequacy for any particular purpose or use. The Company shall not
be liable for any special, incidental, or consequential damages, whether in contract, tort, or otherwise.
