TFA 60.5017.01 Instruction Manual Download Page 13

Page: 13 / 36

– 24 –

– 25 –

Radio controlled projection alarm clock with indoor climate

• If you select ENGLISH, the display will now appear in English.

• The sequence is shown as follows:

– Button tone (default: BEEP OFF)
– DCF reception (default: DCF ON)
– Time zone -12/+12 (default: 00)
– Hour, minutes
– Year, month, date
– Date format DATE/MONTH or MONTH/DATE (default DATE/MONTH)

6.2.1 Button tones

• Press the

–

button to activate (BEEP ON) or deactivate (BEEP OFF) the button

tone in setting mode.

6.2.2 DCF reception

• By default, the DCF reception is activated (DCF ON) and after successful reception

of the DCF signal no manual time setting is necessary.

• Press the

–

button in setting mode if you want to deactivate the DCF reception

(DCF OFF).

• The DCF reception symbol disappears.
• Once the DCF time reception is deactivated the clock must be manually set. No time

zone will appear.

• If the DCF reception is activated, the manually set time will be overwritten by the

DCF time when the signal is received successfully.

6.2.3 Setting of the time zone

• The time zone correction is needed for countries where the DCF signal can be

received but the time zone is different from the DCF time (e.g. +1=one hour plus).

• Press the

–

button to make the time zone correction (+12/-12). .

6.3 Optional display

• With the

CALENDAR

button you can toggle the display in normal mode:

– Weekday written in full letters
– Weekday (3 digits) with date
– Alarm time

7. Alarm clock function

7.1 Alarm time setting

• Press and hold the

ALARM

button for three seconds to enter the setting mode. The

alarm symbol and ALARM appear on the display.

Radio controlled projection alarm clock with indoor climate

• The hour digits flash.
• Press the

–

button to set the desired time.

• Confirm the setting with the

ALARM

button.

• Set the minutes in the same way.
• Confirm the setting with the

ALARM

button.

• The current time and the alarm symbol appear on the display.
• The newly set alarm time appears in the optional display.
• The alarm is activated.

7.2 Activate and deactivate the alarm

• To deactivate and activate the alarm function, press the

ALARM

button in normal

mode.

• The last adjusted alarm time appears for 2 seconds on the display.
• The alarm symbol and ALARM ON appear on the display, if the alarm is activated.
• ALARM OFF appears on the display, if the alarm is deactivated.
• Wait some seconds until the display returns to normal mode to confirm the setting.
• When the alarm is activated, the alarm starts to ring when the set alarm time is

reached. The alarm symbol flashes.

• If the alarm is not stopped manually, the ascending alarm tone automatically turns

off after two minutes and it will be reactivated at the same set time on the following
day.

• When the alarm rings, press the

SNOOZE/LIGHT

button and the snooze function is

activated.

• The alarm will be interrupted for 10 minutes. The snooze symbol flashes on the

display.

• Press any button (except

SNOOZE/LIGHT

) and the alarm will stop. GOOD DAY