Radio-controlled projection clock with thermometer
Radio-controlled projection clock with thermometer
17
16
7.6 Dual time setting
•
Press the
MODE
button three times in the normal mode.
•
DUAL TIME and 0:00 appear on the display.
•
Hold the
MODE
button for 2 seconds. The hour digits are flashing.
•
Press the
–
or
+
button to adjust the time.
•
Confirm with the
MODE
button and set minutes in the same way.
•
Confirm with the
MODE
button.
8. Projection and backlight
A. Without continued projection (CONTINUE PROJECTION off)
•
Press the
LIGHT/SNOOZE
button. The backlight and the projec-
tion w ill light for a few seconds.
B. For permanent projection plug in the adapter and turn on the
CONTINUE PROJECTION
switch upwards.
9. Care and maintenance
•
Clean it with a soft damp cloth. Do not use solvents or scouring
agents. Protect from moisture.
•
Remove the batteries and pull out the plug of the socket, if you do
not use the product for a lengthy period.
•
Keep the instrument in a dry place.
9.1 Battery replacement
•
Replace the batteries when the display becomes weak.
•
Insert two new batteries 1,5 V AAA into the battery compartment,
observing the correct polarity.
10. Troubleshooting
Problems
Solution
No indication
➜
Connect unit to mains adapter
➜
Ensure batteries polarity are correct
➜
Change batteries
No DCF reception
➜
Press and hold
WAVE/°C/°F
button
for two seconds to activate the
reception
➜
Choose another place for the
instrument
➜
Manual setting of the clock
➜
Wait for attempted reception during
the night
➜
Check if there is any source of
interference
7.2 Day-of-week language
•
Press and hold the
–
button to choose the language for the weekday.
•
Language abbreviations change from one language to another: Eng-
lish (EN), German (GE), Italian (IT), French (FR) and Spanish (SP).
7.3 Temperature display
•
Press the
WAVE / °C/°F
button to change between °C (Celsius) or °F
(Fahrenheit) as temperature unit.
7.4 Setting of time zone
•
The time zone is used for countries where the DCF signal can be
received but the time zone is different from the DCF time (e.g.
+1=one hour later).
•
Press and hold the
+
button for 2 seconds in normal mode
(time/temperature display).
•
“F” appears on the display.
•
Press and hold the
MODE
button for 2 seconds.
•
The hour digit is flashing. Press the
–
or
+
button to adjust hours to
your local time.
•
Confirm with the
MODE
button.
•
Press and hold the
+
button for 2 seconds to return to normal mode.
7.5 Alarm setting
•
Select your desired alarm by the
MODE
button:
Alarm 1
Alarm 2
•
Set the alarm time in the desired alarm mode.
•
Press and hold the
MODE
button and the hour digits are flashing.
•
Press the
–
or
+
button to adjust the time.
•
Confirm with the
MODE
button. Set minutes in the same way.
•
Confirm with the
MODE
button and the alarm is activated.
•
appears on the display.
•
If necessary adjust the second alarm time in the same way.
•
To activate or deactivate the alarm function press the
ALARM
button.
,
,
+
or no alarm symbol is shown on the LCD.
•
Once the alarm starts to ring, you can stop the alarm by pressing
the
ALARM
button.
•
You can activate the snooze function by pressing the
LIGHT/SNOOZE
button on the top.
•
Zz appears and the alarm will be interrupted for 4 minutes.
TFA_No. 60.5002_Anleitung_09_16 29.09.2016 16:03 Uhr Seite 9