29
28
SKY–
Wireless weather station
12. Frost indicator
• If the outside temperature is between -2 °C and + 3 °C, the frost symbol appears on the display.
13. Backlight
• To temporarily activate the backlight, press the
SNOOZE/LIGHT
button.
14. Positioning and mounting of the base station and the transmitter
• When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may
trigger incorrect measurement and continuous humidity damages the electronic components
needlessly.
• Place the base station in any room of the house. Make sure to avoid the vicinity of any source of
interference such as computer screens, TV sets or solid metal objects.
• Once the desired location is chosen, check whether the transmission from the transmitter to the
base station is possible (transmission range of up to 60m in open areas). Within solid walls,
especially ones with metal parts, the transmission range can be reduced considerably.
• If necessary choose another position for the transmitter and/or base station.
• Once the transmission is successful, you can wall mount the transmitter or place it onto a flat
surface.
15. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries from all devices if you do not use the products for a long period of time.
• Store the devices in a dry place.
15.1 Battery replacement
• As soon as the battery symbol will appear on the display of the base station beside the outdoor
temperature or on the display of the outdoor transmitter, change the batteries of the outdoor
transmitter.
•
Please note:
When the batteries are changed, the contact between the transmitter and the base station must be
restored – so always insert new batteries into all devices or start a manual transmitter search.
SKY–
Wireless weather station
16. Troubleshooting
Problem
Solution
No indication at the
➜
Ensure the batteries' polarities are correct
base station/transmitter
➜
Change the batteries
No transmitter reception
➜
No transmitter installed
Display “- -”
➜
Check the transmitter batteries
(do not use rechargeable batteries!)
➜
Start manual search for the outdoor transmitter:
Press the
SEARCH
button on the base station for 3 seconds and
then the
RESET
button in the transmitter's battery compartment
➜
Restart the transmitter and the base station according to the
manual
➜
Choose another place for the transmitter and/or the base station
➜
Reduce the distance between the transmitter and the base
station
➜
Check if there is any source of interference
No DCF reception
➜
Press and hold the
WAVE
button for three seconds and start the
initialisation manually
➜
Wait for an attempt reception during the night
➜
Choose another place for your product
➜
Check if there is any source of interference
➜
Restart the instrument according to the manual
➜
Set the clock manually
Incorrect indication
➜
Use a pin to press the
RESET
button on the base station and in
the transmitter's battery compartment
➜
Change the batteries
➜
Restart the instrument according to the manual
LL.L / HH.H
➜
Temperature is outside measuring range
TFA_No. 35.1152_Anl_10_19 23.10.2019 17:27 Uhr Seite 15