Press the [ESC] button to exit the Weather Report screen and return to the Information Board main
screen. Pressing the [ESC] button again will bring you back to the main menu.
Note:
You can use the shortcut button to directly access the weather screen.
3.2 Indoor/Outdoor Temperature & Humidity
The Temperature & Humidity section is the second section on the left hand side of the Information
Board. See the below image for an example. This Weather Viewer product is 5-channel remote
transmitter capable, which means you can purchase other remote transmitters and place them in
different locations to monitor up to 5 locations. One remote transmitter is included which transmits
on one channel (usually channel 1 to start).
The Temperature and Humidity section shows a number that indicates the channel the unit is
receiving. For example in the image below the number of the transmitter is a 5. Which means this
particular unit is receiving channel 5 at the moment. Each channel will appear on the unit for a period
of 5 seconds.
Once this area is highlighted press the [ENTER] button to confirm the selection.
You are then taken to a screen similar to the below image.
By using the “
” or “
” arrows you can scroll between the indoor and outdoor readings (channel
1-5). By using the “
” or “
” arrows you can show past hours data that have been recorded, up
to 24 hours. Press the [ESC] button to exit the Temperature & Humidity screen and return to the
Information Board main screen. Pressing the [ESC] button again will bring you back to the main
menu.
Note:
There is no current update on the screen.
