39
INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The weather station uses 2 x AA, IEC LR6, 1.5V batteries. To
install and replace the batteries, please follow the steps below:
1.
Remove the cover at the back of the weather station.
2.
Insert batteries observing the correct polarity (see
marking).
3.
Replace compartment cover.
Battery replacement
Replace the batteries when the battery symbol of the weather station appears above the
humidity display.
When the batteries of the transmitter are used up, the low battery icon appears on the upper
display, near the outdoor temperature display.
Note:
In the event of changing batteries in any of the units, all units need to be reset by following the
setting up procedures. This is due to a random security code assigned by the transmitter at start-
Summary of Contents for 35.1084.IT
Page 1: ...125 75mm...
