50
INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The weather station uses 2 x AA, IEC LR6,
1.5V batteries. To install and replace the
batteries, please follow the steps below:
1.
Remove the cover at the back of the
weather station.
2.
Insert batteries observing the correct
polarity (see marking).
3.
Replace compartment cover.
Battery replacement
•
Replace the batteries when the battery symbol of the weather station appears above
the indoor temperature.
•
When the batteries of the transmitter are used up, the low battery icon appears above
the outdoor temperature display.
Note:
In the event of changing batteries in any of the units, all units need to be reset by following
the setting up procedures. This is because a security code is assigned by the transmitter at
start-up and this code must be received and stored by the weather station in the first 3
minutes of power being supplied to it.
