Hanging Hole
LCD Display
Battery cover
Detachable stand
Function keys
WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this Weather Station with indoor temperature and humidity display and weather forecast
.
It is further featuring a DCF-77 radio controlled clock. With three easy to use function keys, this innovative product is
ideal for use in the home or office
.
FEATURES
•
DCF-77 Radio controlled time with manual setting option
•
24 hour time display
•
Weather forecast with weather tendency indicator
•
Indoor temperature display in °C with MIN/MAX recordings
•
Indoor humidity display in RH%
•
MIN/MAX recordings reset
•
Wall mounting or table standing
SETTING UP
:
1.
Insert the batteries into the Weather Station (see “
How to install and replace batteries in the Weather Station
”
below). Once the batteries are in place, all segments of the LCD will light up briefly. Then the indoor temperature
and humidity, the time as - : - - and the weather icon sun with clouds will be displayed. If the indoor temperature
and humidity are not displayed after 15 seconds, remove the batteries and wait for at least 10 seconds before
reinserting them.
2.
Once the indoor data have been displayed on the Weather Station, the DCF-77 time code reception is
automatically started. This takes typically between 3-5 minutes in good conditions.
3.
If after 10 minutes the DCF time has not been received, use the SET key to manually enter a time initially
.
The
clock will automatically attempt each hour to receive the DCF time. When this is successful, the received time will
override the manually set time. (Please refer also to notes on “
Radio controlled time
” and “
Manual time
setting
”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace
the batteries, please follow the steps below:
1.
Insert finger or other solid object in the space at the bottom centre of the
battery compartment and lift up to remove the cover .
2.
Insert batteries observing the correct polarity (see marking).
3.
Replace compartment cover.
