false reset. Should this happen accidentally then reset all units (see Resetting below)
otherwise transmission problems may occur.
The transmission range is about 20- 25 m from the transmitter to the Weather Station (in
open space). However, this depends on the surrounding environment and interference
levels. If no reception is possible despite the observation of these factors, all system units
have to be reset (see Resetting below).
Resetting:
1. Remove the batteries from both the Weather Station and the transmitter.
2. Wait at least 30 seconds and repeat the procedures specified in Setting up above.
Note:
Always wait at least 30 seconds before reinserting the batteries, otherwise transmission start
up problems may occur.
Remember when resetting, that both units have to be reset and to always reinsert the battery
into the transmitter first.
WALL MOUNTING- WEATHER STATION:
The Weather Station has been designed to be hanging on a wall. To wall mount, please do
the following:
1. Fix a screw (not supplied) into the desired wall, leaving the head extended out the wall by
about 5 mm as indicated above.
2. Using the Weather Station's hanging hole on the back of the unit, carefully hang it onto the
screw. Always ensure that the product securely locks onto the screw head before releasing.
WALL MOUNTING -TEMPERATURE TRANSMITTER:
The Temperature transmitter is supplied with a holder that may be attached to a wall with the
three screws supplied. To attach 10 the wall, please follow the steps below:
