1. Firstly, slide the battery cover open on the Temperature transmitter as indicated above.
2. Checking the correct polarization, insert 2 x AAA, IEC LR3, 15V batteries into the battery
compartment.
3. Replace the cover while ensuring that the batteries do not spring free from the contacts.
4. Now flip open the battery cover at the back of the Weather Station as indicated above.
5. Checking the correct polarization, insert 2 x AAA, IEC LR3, 15V batteries into the battery
compartment.
6. Replace the battery cover.
Note:
Should inserting the batteries into the Weather Station take longer than 3 minutes, reset both
units (see Resetting below) otherwise 433MHz reception problems may occur.
LCD SCREEN
Note:
When setting up, always remember to insert the battery into the transmitter first as it will start
transmitting the outdoor temperature for the Weather Station to receive (always ensure
batteries used are new and of the correct sizes).
The transmitter will automatically start measuring the outdoor temperature once the batteries
are inserted. Should the outdoor temperature not be received within one minute after
inserting the batteries into the Weather Station, then please see "Checking tor 433MHz
reception" below.
Immediately after inserting the batteries in to the Weather Station, all the segments on the
LCD will light up briefly before displaying the time section, indoor and outdoor temperature
readings and sun with two clouds icons. The time displayed will be "0:00" and will require
setting as follows:
