27
1.
Remove the cover at the back of the
temperature station.
2.
Insert batteries observing the correct
polarity (see marking).
3.
Replace compartment cover.
Battery replacement
•
Replace the batteries of the temperature station when the battery symbol
appears above the indoor temperature display.
•
When the batteries of the transmitter are used up, the low battery icon
appears above the outdoor temperature display.
Note:
In the event of changing batteries in any of the units, all units need to be reset by
following the setting up procedures. This is because a random security code is
assigned by the transmitter at start-up and this code must be received and stored by
the temperature station in the first three minutes of power being supplied to it.
SETTING UP:
Note: This temperature station receives only one outdoor transmitter.
1.
First, insert the batteries into the temperature transmitter. (see “
Install and
replace batteries in the temperature transmitter
“).
2.
Immediately after and within 30 seconds, insert the batteries into temperature
station (see “I
nstall and replace batteries in the temperature station
”).
