32
Press and hold the SET key for about 3 seconds to advance to the setting mode:
MANUAL TIME SETTING
In case the temperature station is not able to detect the DCF-signal (disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as
a normal Quartz clock.
1.
The hour digit in the time section starts flashing. Use the MIN/MAX/+ key to
set the hour.
2.
Press the SET key to enter the minutes. The minute digits start flashing.
3.
Use the MIN/MAX/+ key to set the minute.
4.
Press again the SET key to confirm and enter the
Calendar setting
mode.
Note:
The unit will still try and receive the signal despite it being manually set. When it
does receive the signal, it will change the manually set time into the received time.
CALENDAR SETTING
The date default of the temperature station is 1. 1. in the year 2008. Once the radio-
controlled time signals are received, the date is automatically updated. However, if
the signals are not received, the date can also be set manually:
Minutes (flashing)
Hours (flashing)
