41
POSITIONING THE TEMPERATURE STATION:
The Temperature station comes attached with a removable table stand, which provides the
option of table standing or wall mounting the unit. Before wall mounting, please check that the
outdoor temperature(s) can be received from the desired location(s). To wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the head extended out the by
about 5mm.
2. Remove the stand from the Temperature station by pulling it away from the base and
hang the station onto the screw. Remember to ensure that it locks into place before
releasing.
POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
The Temperature Transmitter is supplied with a holder that may be attached to a wall
with the three screws supplied. To attach to the wall, please follow the steps below:
1.
Mark the wall using a pen through the holes in the holder to obtain the exact
drilling position.
2.
Drill holes in the wall at the points marked.
3.
Screw holder onto wall.
There is also double sided tape included with the wall mount. On smooth surfaces
this can be used instead of drilling holes. The mounting surface can, however, affect
the transmission range. If for example the unit is attached to a piece of metal, it may then either reduce or
increase the transmitting range. For this reason, we recommend not placing the unit on any metal surfaces
