27
SETTING UP:
1. First, insert the batteries into the Temperature Station (see “
How to install and replace batteries in the
Temperature Station
”
below). Once the batteries are in place, all segments of the LCD will light up
briefly and a short signal tone will sound. Then the indoor temperature, the time as 0:00 and the date as
1.1. will be displayed. If the indoor temperature is not displayed after a few seconds, remove the
batteries and wait for at least 10 seconds before reinserting them. Once the indoor data is displayed
proceed to step 2.
2. Within 3 minutes of activating the Temperature Station, place the batteries into the Temperature
Transmitter (see “
How to install and replace batteries in the Temperature Transmitter
”
below
).
3. After inserting the batteries into the transmitter, the Temperature Station will start receiving transmissions
from the transmitter. The outdoor temperature should then be displayed on the Temperature Station. If
this does not happen within 15 minutes, the batteries will need to be removed from both units and reset
from step 1.
4. The Temperature Station can take up to 3 remote transmitters. If you have purchased additional
transmitters, follow step 2 for all extra transmitters. However, ensure that you leave 10 seconds in
between the reception of the last transmitter and the set-up of the following transmitter. The Temperature
Station will number the transmitters in the order of set-up, i.e. the first transmitter will have the
temperature displayed with the number 1 against it and so on.
5. When all the transmitters are set up, there is a testing period, during which the display switches quickly
between all the received transmitters at random, according to which random transmission it receives.
