TEXWRAP 2200SS SIDE SEAL, Manual

Page: 17 / 72

17
X. MAINTENANCE
To prevent excessive down time and costly repairs a maintenance schedule should be kept (sample
below). The most crucial part being the daily wipe downs. Some films, do to the way they are
processed, leave residue on the inside rollers. By keeping the belts clean, the buildup on the rollers will
be substantially less.
Recommended Maintenance Schedule:
Daily:
1. Check condition of silicon backup rollers on the sideseal. Replace if necessary.
2. Check regulator bowl for water and/or oil.
3. Check the silicon pad beneath the cross seal for wear. Replace if necessary.
4. Check conveyor belts for proper tracking.
Weekly:
1. Wipe down all visible bearings with clean, dry cloth. Do not use any oil.
2. Wipe down the conveyor belts.
Monthly:
1. Check all chain drives for proper tension.
2. Wipe down machine completely.
3. Grease bearings that have grease fitting. Do not grease linear slide bearings.
4. Oil rod ends and main cylinder clevis pin with light oil.
5. Check for proper tension on motion pan drive timing belt, adjust using the two tensioning screws
under exit conveyor. Adjust the two screws together, 1/8 turn each, until white timing belt is taught.
WARNING: If adjustments to belt tension screws are not done in unison, the timing belt may track off
of the timing pulleys, causing belt or pulley failure.