Textron Stampede 900 2017, Repair And Service Manual

Page: 108 / 237

B
96
Repair and Service Manual
REAR AXLE AND SUSPENSION
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
668061
Fig. 25 Differential Mounting Bolts
19. Remove the bolt (25), washer and nut that secure
the differential to the rear engine mount (See Fig.
17)(Ref. Fig. 26).
Fig. 26 Rear Engine Mount
20. With the aid of an assistant, hoist the rear differential
up and out of the vehicle.
21. Installation of the differential is in the reverse order of
removal.
22. Tighten the hardware to the torque values specified:
Adjusting the Shift Lever Cable
Tool List Qty.
Wrench, 18mm.............................................................2
Move the shift lever (2) through it’s entire range from the
P (park) position to the H (high) position. If the shift lever
contacts the instrument panel in either the P or H position,
adjustment is required.
The shift lever cable (3) can be adjusted in or out at the
selector bracket by turning the jam nuts (19) (Ref. Fig.
27). If further adjustment is required, the rear of the cable
at the transmission can be adjusted (Ref. Fig. 28).
Fig. 27 Shift Lever
25
Item Torque Specification
5 33 - 37 ft. lbs. (45 - 50 Nm)
10 33 - 37 ft. lbs. (45 - 50 Nm)
11 33 - 37 ft. lbs. (45 - 50 Nm)
17 33 - 37 ft. lbs. (45 - 50 Nm)
25 50 - 53 ft. lbs. (68 - 72 Nm)
8
7
11
19
2
12
Instrument Panel
Support Weldment
1
Front of Vehicle
3