13
CONTROLS AND INSTRUMENTS
Figure 18 - Hydraulic Flow Control Valve
DRAFT AND POSITION CONTROL LEVERS
The hydraulic lift control levers are shown in
Figure 19. The levers are located at the right hand
side of the, seat. The outer lever is position control
lever, the inner lever is the draft control lever. The
position control lever is used to raise or lower the
hydraulic lift arms. To raise the lift arms, pull the lever
upward. To lower the lift arms, push the lever
downward. The adjustable stop is provided for
locating the lever at any position in the quadrant. The
draft control lever is used to adjust sensitivity to draft
loads. For light draft loads the lever is moved forward,
and for heavy draft loads the lever is pulled rearward.
Figure 19 - Hydraulic Lift System Control -Draft
and Position Control (Optional)
REMOTE CONTROL VALVES - OPTIONAL
Two types of remote control valves are available for
your RANSOMES Tractor. A single or double spool
valve is available to operate one or two remote
cylinders for front and rear-mounted implements.
Refer to page 21 for operating instructions.
HYDRAULIC MANIFOLD BLOCK
Your RANSOMES Tractor is equipped with a
hydraulic manifold block, which can be utilized to
supply oil to hydraulic equipment such as a front
loader, dozer blade, etc.
Refer to “OPERATING HYDRAULIC MANIFOLD
BLOCK” on page 22.
Summary of Contents for Ransomes CT445
