HE.14519_C © 11/2010
3
ES 32-L ES 32F-L
GB
Instruction Manual Cutting Tool
authorised
copy
3.2 Brief description of the important features of the unit
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the
maximum operating pressure is reached.
A manual retraction stop allows the user to stop the retract at any position during the automatic retraction.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect cut.
The unit is equipped with a special brake which stops the forward motion of the blades when the trigger is released.
The cutting head can be smoothly turned by 330° around the longitudinal axis in order to gain better access to tight
corners and other dif
fi
cult working areas.
A white LED illuminates the working space after activating the trigger. It automatically switches off 10 sec. after relea-
sing the trigger. This feature can be deactivated (see page V)
The compact ergonomically formed design consists of 2 components. The grip area is rubber coated and therefore
slip resistent. The housing design is optimized in respect of the center of gravity which improves the handling and
supports fatique-proof working.
All tool functions can be controlled by
one
trigger. This results in an easy handling and a better grip compared to a
two button operation.
Li-Ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool
is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter char-
ging cycles compared to NiMH batteries.
The oil used in our tool is particularly environmentally friendly and and has been rewarded „
The Blue Angel
“. The oil
is also suitable for low temperatures and has excellent lubrication characteristics.
The tool is equipped with a microprocessor which indicates service intervals and low battery charges and performs
internal checks.
3.3 Description of the tool indication
This tool is equipped with a special circuit board incorporating several important features to inform the user about the
current status of the unit. Please see Table 1 for more details.
Prior to operating the unit the charging level of the battery should have been tested. A low charging level can be
detected by the
fl
ashing of the LED for 20 s at the end of a cutting cycle.
2K
