Instruction
Manual
HK60
VPFT
page
19
_____________________________________________________________________________
Attention
Do only crimp Klauke copper and Al conducting material or special connecting
material mentioned in table 2.
If different conducting materials have to be crimped, please contact the manufacturer.
Attention
Do not crimp on live cables or conductors
Before starting to crimp please make sure that all parts involved in the crimping process are
not connected to live circuits.
5.3. Mounting instructions
In order to guaranty the required crimping force we provide you upon request with a special
gauge (TGVP) and test slugs (TS10). The slug must be centered in the crimping head and
crimped in axial direction. The difference in length provides information about the actual
crimping force of the tool. (Pls. see picture 2) If the slugs are too long or too short the tool
must be re-adjusted.
Please read the assembly instructions of our general catalogue.
Instruction
manual
HK60
VPFT
page
19
___________________________________________________________________________
Attention
Do only crimp Klauke copper and Al conducting material or special connecting
material mentioned in table 2.
If different conducting materials have to be crimped, please contact the manufacturer.
Attention
Do not crimp on live cables or conductors
Before starting to crimp please make sure that all parts involved in the crimping process are
not connected to live circuits.
5.3. Mounting instructions
In order to guaranty the required crimping force we provide you upon request with a special
gauge (TGVP) and test slugs (TS10). The slug must be centered in the crimping head and
crimped in axial direction. The difference in length provides information about the actual
crimping force of the tool. (Pls. see picture 2) If the slugs are too long or too short the tool
must be re-adjusted.
Please read the assembly instructions of our general catalogue.
