RK1550 15-ton, Single-acting, Die-type Crimping
Tool
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
8
Adapter Kits
(cont’d)
Procedure for Using Burndy Y46 Dies
48820 Die Holder Kit
1. Install the upper 48822 die holder assembly in hole
in top of “C” head. Snap in place with top die holder
retaining spring plunger (6).
2. Install lower 48821 die holder assembly in hole in
end of piston. Snap in place with bottom die holder
retaining spring plungers (6).
48820 Die Holder Kit contains (1) each:
48822 Upper Die Holder and 48821 Lower Die Holder
3. Select proper die set for fitting to be crimped.
4. Slide top die into place in die holder while simulta-
neously squeezing both retainer buttons. Release
buttons and allow them to snap into place. Repeat
operation for other die entry.
48822 Y46 DIE
HOLDER ASSEMBLY
BOTTOM DIE
HOLDER RETAINING
SPRING PLUNGERS (6)
BOTTOM DIE
RETAINING
MECHANISM (2)
TOP DIE
RETAINING
MECHANISM (2)
TOP DIE
HOLDER
RETAINING
SPRING
PLUNGER (6)
