855GX Electric Bender
Greenlee / A Textron Company
18
Bending Instructions
90° STUBS
1. Measure the length of the required stub.
2. Refer to the Minimum Stub Length formula on the
Deduct Table. The required stub must be equal to or
longer than the Minimum Stub Length.
3. Measure and mark the stub length on the conduit.
This is Mark 1. Subtract the Deduct from this mark
and make a new mark. This is Mark 2.
4. Align Mark 2 with the front edge of the hook and
bend the conduit.
Note: The shoe bends to 90° maximum.
STUB LENGTH
DEDUCT
MARK 2
MARK 2
MARK 1
MARK 1
STUB LENGTH
Deduct Table
CONDUIT SIZE
1
1-1/4
1-1/2
2
DEDUCT
STEEL RIGID
11-7/8
14-3/8
15-3/8
16-5/8
EMT
11-7/8
14-3/8
15-3/8
16-7/8
IMC
11-7/8
14-3/8
15-3/8
16-5/8
ALUM. RIGID
11-7/8
14-3/8
15-3/8
16-5/8
MINIMUM STUB LENGTH = DEDUCT PLUS 2 INCHES
Figures are approximate
www.
.com
1.800.561.8187
