EK50ML Battery-powered Crimping Tool
Greenlee / A Textron Company
7
Operation
Inspect tool and dies before use. Replace any
worn or damaged parts. A damaged or improp-
erly assembled tool can break and strike nearby
personnel.
Failure to observe this warning could result in severe
injury or death.
Electric shock hazard:
This tool is not insulated. When
using this unit on or near energized
electrical lines, use proper personal
protective equipment.
Failure to observe this warning
could result in severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from
flying debris or hydraulic oil.
Pinch points:
• Remove battery before changing
dies, adapters, or jaws.
• Keep hands away from the crimp-
ing tool head when crimping.
Failure to observe these warnings
could result in severe injury or death.
• Allow approximately 3 to 5 minutes of time to cool
down as tool automatically switches off when it
gets too hot.
• Do not secure this tool in a vise. This tool is
designed for hand-held operation.
• Use this tool for the manufacturer’s intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
Charging the Battery
Read the instructions supplied with the battery charger.
LED Work Light (white)
This LED automatically turns on when the trigger is
pulled. It remains on for 10 seconds after the trigger is
released.
LED Indicator (red)
This tool is equipped with a special circuit board incor-
porating several important features to inform the user
about the current status of the unit. The LED signals in
the following cases:
When
What it means
2 x
After
inserting
the battery
Battery is
inserted in tool
20 sec
After
working
cycle
Low battery
20 sec/2 Hz
Contact Greenlee
service
20 sec/5 Hz
20 sec/5 Hz
Tool has become
too hot
1 x
1 x
After
interruption
Error – manual
interruption of
crimp cycle prior
to completion
3 x
3 x
After
working
cycle
Error – automatic
opening of tool
due to exceeding
crimp force
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
