915FS Splicer
Greenlee / A Textron Company
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
37
Section 4. Specifications
Applicable Fibers
MMF (ITU-T G.651), SMF (ITU-T G.652),
DSF (ITU-T G.653), NZDSF (ITU-T G.655),
BIF (ITU-T G.657), EDF
Fiber Cleaved Length
10 mm
Cladding Diameter
80-150 μm
Coating Diameter
100-1000 μm
Fiber Count
Single
Fiber Aligning Method
Active Clad Alignment
Return Loss
≥60 dB
Actual Average Splice Loss 0.02 dB (SM), 0.01 dB (MM), 0.04 dB (DS),
0.04 dB (NZDS, LEAF, and BIF)*
Splicing Mode
60 preset/user-definable modes
Splicing Time
<9 seconds in standard SM, 12 seconds in AUTO modes
Arc Calibration Mode
Automatic and Manual
Boot Time
5 seconds
Protection Sleeve Length
60 mm, 40 mm, and micro sleeves
Storage of Splice Results
5000 results
Tension Test
2 N
Fiber Display Magnification 200X
Tube Heating Mode
20 preset and user definable modes;
adjustable 0–240 seconds
Attenuator Mode
0.1 to 15 dB
Electrode Life
5000 splices
Splices per Battery Charge
240
Tube Heating Time
28 seconds typical (24s to 36s)
Splicing/Heating Times
150 cycles (splice/tube heat) typical
Display
3.5 inch color turn-over LCD
Connectivity
USB 2.0
Ingress Protection
IP5X (Dust); IPX2 (Water)
Operating Condition
0-5000 m (0-16,400 ft) above sea level; 0 to 95% RH;
-25 to 50 °C (-13 to 122 °F): Maximum wind velocity of
15 m/s
Storage Condition
-30 to 70 °C (-22 to 158 °F); 0 to 95% RH
Power Supply
North America AC adapter (100-240 VAC); Li battery
(4400 mAh)
Weight
1.5 kg (3.3 lb) including battery
1.2 kg (2.6 lb) without battery
Dimensions (HxWxT)
125 x 125 x 135 mm (4.9 x 4.9 x 5.3 in)
Splice-on Connector
SC, LC, FC, and ST
* Insertion loss is for cut and re-splice of identical fibers.
