2
BZT
2200D
Series
SAFETY
NOTICE !!!
Unauthorized modifications may present
extreme
safety hazards to operators and bystanders and
could also result in product damage.
Textron Golf, Turf & Specialty Products strongly
warns against, rejects and disclaims any
modifications, add-on accessories or product
alterations that are not designed, developed, tested
and approved by Textron Golf, Turf & Specialty
Products Engineering Department. Any Textron
Golf, Turf & Specialty Products product that is altered,
modified or changed in any manner not specifically
authorized after original manufacture–including the
addition of “after-market” accessories or component
parts not specifically approved by Textron Golf, Turf
& Specialty Products–will result in the Textron Golf,
Turf & Specialty Products Warranty being voided.
Any and all liability for personal injury and/or property
damage caused by any unauthorized modifications,
add-on accessories or products not approved by
Textron Golf, Turf & Specialty Products will be
considered the responsibility of the individual(s) or
company designing and/or making such changes.
Textron Golf, Turf & Specialty Products will vigorously
pursue full indemnification and costs from any party
responsible for such unauthorized post-manufacture
modifications and/or accessories should personal
injury and/or property damage result.
This symbol means:
ATTENTION!
BECOME ALERT!
Your safety and the safety of others is involved.
Signal word definitions
:
The signal words below are used to identify levels of
hazard seriousness. These words appear in this
manual and on the safety labels attached to Bunton
machines. For your safety and the safety of others,
read and follow the information given with these
signal words and/or the symbol shown above.
DANGER
indicates an imminently hazardous
situation which, if not avoided,
WILL
result in death
or serious injury.
WARNING
indicates a potentially hazardous situation
which, if not avoided,
COULD
result in death or
serious injury.
CAUTION
indicates a potentially hazardous situation
which, if not avoided,
MAY
result in minor or moderate
injury. It may also be used to alert against unsafe
practices or property damage.
CAUTION
used without the safety alert symbol
indicates a potentially hazardous situation which, if
not avoided,
MAY
result in property damage
MODEL NUMBER:
This number appears on
sales literature, technical manuals and price lists.
SERIAL NUMBER:
This number appears only
on your mower. It contains the model number
followed consecutively by the serial number. Use
this number when ordering parts or seeking
warranty information.
SPECIFIC TORQUES
BLADE BOLT TORQUE: 70 FT-LBS (95 Nm)
WHEEL HUB NUTS: 175 FT-LBS (237 Nm)
ENGINE CRANKSHAFT BOLT: 50 FT-LBS (68 Nm)
ENGINE MOUNTING BOLTS: 30 FT-LBS (68 Nm)
Summary of Contents for 642225
