Texlabel SPB User Manual Download Page 7 | Manualshive

Page: 7 / 33

background image



SPB

www.texlabel.eu [email protected] +39 0444 287002

7

WARNING!!! RISK OF BEING CUT
PROCEED WITH THE PROCESS WITH THE AC CORD DISCONNECTED FROM THE PRINTER

Install the lateral guards as shown below, making sure to align the fastening points indicated by the arrows.

The lateral guards are both different from one another, one is for the left side and one is for the right side.

Be careful in positioning the guards.
In case of difficulty with these processes, contact TEXLABEL technical support.

Once the lateral guards and stacker is installed, the cutter will look as so:

«
...
5
6
7
8
9
...
»

Summary of Contents for SPB


































Reviews:

No comments

Related manuals for SPB

Brand: Faema Pages: 328

Brand: Welbilt Pages: 288

Brand: Handpresso Pages: 41

DESIGN COFFEE AROMA PLUS

Brand: Gastroback Pages: 44

Brand: Hamilton Beach Pages: 28

Brand: U-Line Pages: 55

Brand: Orbegozo Pages: 19

Brand: Klarstein Pages: 36

Brand: Cloer Pages: 60

Brand: Frigomat Pages: 97

Brand: WOOSIM Pages: 35

Brother QL-810W

Brand: Procuro Pages: 4

ISO Novo system th

Brand: VHH Pages: 3

Brand: Villaware Pages: 8

Brand: RTC Pages: 17

ide line 745-190

Brand: Ide Line Pages: 10

Brand: Carnival King Pages: 3

Brand: Clatronic Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands