68
or OFF by using
◁
and
▷
buttons. Press ENTER on your selection.
The locations of the
buttons are shown with red rectangle frames in
Figure 4-26
.
Procedures: MENU
→
SYSTEM
→
DISPLAY
→
{ON|OFF}
Figure 4-26
Remote Interface Operation
The following commands show how to control the display as well as how to send a
message to the display:
DISPlay {OFF|ON}
(
turns off or turns on the display
)
DISPlay:TEXT <quoted string
>
(displays the string you type in)
DISPlay:TEXT:CLEar
(clears the message displayed)
3.4.2 Beeper
DL-2060 multimeter beeps when some certain conditions are met or when an error
occurs. But there may be time you want to disable the beeper for some operations.
Although you can turn off the beeper, the click sound you hear when a button is pressed
will not be disabled.
By disabling the beeper you will not hear the meter beeps when
:
a new minimum or maximum is found in Min/Max operation
.
a stable reading is detected and held
.
the test voltage is within the limits in diode testing
.
the source signal fails the limit testing.
After the beeper is disabled, the meter still emits a tone when:
an error occurs
.
any button on the front panel is pressed
.
the threshold value is exceeded in continuity testing.
Summary of Contents for DL-2060
Page 37: ...31 Figure 3 17 1 2 3 5 5 4...
Page 136: ...130...
Page 137: ...131...
Page 138: ...132 D DL 2060 s Dimension...
