Texi Forte UF, Instruction Manual

Page: 37 / 52

Adjustment
37
13
.05.05
Centering the needle in the needle hole
Requirement
With the stitch length set at " 0 " , the needle must enter the needle hole exactly in the
middle.
Unscrew vibrating presser
1
and presser foot
2.
Set stitch length "
0
" and bring the needle bar to its TDC.
Insert a new needle. Loosen screws 3, 4, 5 and 6.
Position the needle directly over the bottom feed dog by turning the handwheel.
Move needle bar frame
7
in accordance with the
requirement
.
Tighten screws 3, 4 and 5.
Position stop 8 so that it is touching needle bar frame 7 and tighten screw 6.
The movement of needle bar frame
7
in guide
9
and of the top feed drive bars
must not be stiff.
Fig. 13 - 05
2
3
1
9
5
6
7
4
8
Texi HD Forte UF instruction manual