7) Remove the memory card and delete the firmware file texet.bin from it Installing
the new firmware is complete!
Possible faults and troubleshooting
Faults
Likely causes
Solutions
Device does not turn
on
Device needs some time
to recharge or needs to
restart.
- Charge the battery or
RESET.
Device does not
record video to a
memory card
Card is damaged, card
speed marking does not
match the actual values,
there is no free space
on the card.
- Format the card in
the device if necessary,
replace the card.
Device turns off itself
Power adapter fault,
current in the car’s
cigarette lighter socket
is interrupted after the
ignition switch, fault
of the recording on a
memory card.
- Replace the power
adapter with a compati-
ble one;
- Set the
«Delay»
for
10 sec.;
- See above...
Device does not catch
the satellites,
speed is not dis-
played, coordinates
are not displayed
*
Only available for models
with GPS
Poor conditions of
GPS signal reception:
weather conditions, the
availability of buildings
and/or flooring, athermal
windscreen cover, etc.;
GPS antenna fault;
device is not connected
to power.
- Connect the power
adapter;
- Use GPS-function
with sufficient signal
reception;
- Turn the speed/coordi-
nates stamp in the video
settings.
ENG
6
DVR.indd 6
16.01.2014 13:31:32
