Switching on and off
Press and hold the
POWER
button (item 1 in Fig.) for a few seconds until the
screen saver appears, accompanied by an audible signal. To completely turn off the
device, press and hold
POWER
.
1) Insert the memory card into the slot (item 6 in Fig.);
Getting Started
WARNING! Check card marking before buying!
For the proper operation, the
DVR requires the memory cards marked
CLASS
6
and above. MicroSDXC memory
cards are supported in an experimental mode.
The company teXet Global SE is not responsible for low-quality memory cards.
Note:
check if the card is not blocked (switch on the memory card must be in the
LOCK
position).
a) Insert the memory card effortlessly until it clicks;
b) If the device cannot initialize the memory card or the file system on it is not op-
timal, you may need to format it on the device (in this case, all data on the memory
card will be deleted).
2) Connect the mount to the connector (item 3 in Figure);
5
USB connector
6
Memory Card slot
7
Button to start recording (
REC
), button to confirm the action in the
menu (
OK
)
8
Mode switch (
MODE
)
9
Up/down scroll (
UP/DOWN
)
10
Speaker
11
LEDs
12
Lens
13
Reset button (
RESET
)
14
Video connector
HDMI
ENG
3
DVR.indd 3
16.01.2014 13:31:31
