UDL-Modem Installation Manual
INS147-2
8
6)
Refer to "Telephone Line Connections".
TO
P
A
N
E
L
J 1
An
s
w
e
r
Ph
on
e
De
fe
rr
e
d
J 2
L E D 1
A
B
A1
B1
Te le p h o n e
C a b le E n try (B )
C o n tro l P a n e l
C a b le E n try (A )
Figure 2. Cable Routing
Connecting the UDL-Modem to the Telephone Line
%
To connect the telephone line, proceed as follows:
1)
Connection to the telephone network must be made via an NTE5
master socket (Line Box).
2)
Using the cable type 1/0.5mm CW1308, strip back 5mm of the
required cores and feed through cable entry “B”.
3)
CW1308 cable is available from RS Components (Part No. 368-413).
Alarm or any other type of cable must not be used.
4)
Connect the cores to the terminal blocks marked “A”, “B”, “A1" and
“B1”.
5)
Remove the two screws from the BT master socket and remove the
bottom section from the master socket.
