Texecom Premier Elite Impaq Plus-W Quick Start Manual Download Page 3

Page: 3 / 3

Technical Support

91520 10269



5. How to identify the LED status of sensor?

Ans:

Below are the detailed details of the LED status.

Colour Status

Description

Flashing

Green

Comfort LED. When the reed switch is closed, the comfort

LED will flash green approximately every 3sec to indicate

correct operations.

Momentary

Green

Background disturbance/under-sensitive setting. This is

used to indicate background disturbances or an under-

sensitive setting during installation.

Momentary

Red

Alarm condition/correct sensitivity. This is used to indicate

that an attack has been detected by the shock sensor or

a correct sensitivity setting during installation.

Momentary

Orange

Gross attack /over-sensitive condition. This is used to

indicate that a massive attack has been detected by the

shock sensor or an oversensitive setting during installation.

Summary of Contents for Premier Elite Impaq Plus-W

Page 1: ...reset button When it starts learning you need to insert the battery into the Impaq plus W Premier Elite Impaq Plus W GBB0003 Press Yes till you reach zone type Note In this case we re learning sensor in zone 10 Press any free zone number eg 010 to learn your Impaq plus W Note Before learning the sensor we need to place the jumper in relearn ...