ComISDN
Installation Manual
Installation
INS187
9
Programming the
ComISDN
!
To program the
ComISDN,
proceed as follows:
1.
Enter into the Engineers Menu
!"#$
.
2.
Select the
UDL/Digi Options
menu
%
and
press
&
.
3.
Select the
Program Digi
menu
#
and
press
&
.
•
Select the required
ARC
set
!"
or
#
.
•
Select the Protocol i.e.
Fast Format
•
Enter the Primary Number for the ARC
•
Enter the Secondary Number for the ARC
•
Enter the
Account Number
•
Enter the number of
Dialing Attempts
(minimum=1)
•
For Fast format select the
Reporting
channels
•
For Fast format select the
Restoring
channels
•
For Fast format select the
Open/Close
channels
•
For all other formats select the
Areas
that will report events
•
For all other formats select the types of events that will be
Reported
•
Select any
Config.
Options that may apply
4.
To exit from the
Program Digi
menu
press
+
.
5.
Select the
Digi
Options
menu
$
and
press
&
.
•
Select Digi is Enabled (E)
•
Select any other options that may be applicable
6.
To exit from the
Digi Options
menu
press
+
.
Testing
Testing the Communicator
!
Once all the installation steps have been completed, proceed as follows:
1.
Reconnect power to the control panel.
2.
Please refer to the control panel Installation Manual for full details on
programming and testing the digimodem.
3.
Finally replace and secure the control panel cover.