Texas TSW1100, Quick Start Manual

Page: 17 / 18

www.ti.com
Performing a Screen Capture
EVM WARNINGS AND RESTRICTIONS (continued)
Applying loads outside of the specified output range may result in unintended operation and/or
possible permanent damage to the EVM. Please consult the EVM User's Guide prior to
connecting any load to the EVM output. If there is uncertainty as to the load specification, please
contact a TI field representative.
During normal operation, some circuit components may have case temperatures greater than xxx
C. The EVM is designed to operate properly with certain components above xxx C as long as the
input and output ranges are maintained. These components include but are not limited to linear
regulators, switching transistors, pass transistors, and current sense resistors. These types of
devices can be identified using the EVM schematic located in the EVM User's Guide. When
placing measurement probes near these devices during operation, please be aware that these
devices may be very warm to the touch.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2005, Texas Instruments Incorporated
SLAU155 – August 2005 Exiting the Program 17