www.texas.dk
33
13. Start
PROCEDURE
7. Open the fuel tap.
8. Turn the choke to the right, if the engine is already warm it is not necessary to use
the choke.
9.
Turn the engine’s gas control completely to the left, thereby full gas is applied.
(If the engine is mounted on a machine with cable-regulated gas, full gas is given).
10.
Turn the machines ignition switch to the ”ON” position.
11.
Pull the engine’s starting cord slowly until you feel resistance. Thereafter pull in one
long draw. Never let the starting cord run back by itself, always follow it with your
hand.
12. Regulate the gas until the engine is running evenly.
1.
2.
3.
4.
5. Käynnistys
5. Starting
Fuel tap
Closed
Closed
Choke
HIGH
LOW
Ignition switch
