www.texas.dk
32
Assembly
1.
The bottom of
the air filter
intake.
2.
Lid on the
intake.
It is important
that the lid is
pushed down
in the holder
so that it fits.
Correct
assembly
shown on
picture.
3.
WRONG !!
Notice the
gap between
bottom and
lid.
4.
Place the
holder to the
air filter on the
lid. It is
important that
the tap on the
lid fits with the
tap on the
holder.
5.
Place the
filter in the
holder. Use
the knurled
nut to fasten
with. It is
important it is
fastened
securely.
6.
Mount the lid.
Gasket and
washer plate
are added and
fastened with a
knurled nut.
Make sure all
parts fit
correctly so
that no false
air gets into
the engine.
If you are in doubt that the air filter is mounted correctly,
please contact your Power Line dealer..