19
Starting the Wheelbarrow
Switch on the power. A red LED light lights up and indicates that you are ready to go (
Figure
22
). Activate the speed control by lifting the bar (
Figure 23
). The speed control is a variable
type, which means the higher you lift the bar, the faster it will travel. Remember to switch off
the power after each use.
Stopping the Wheelbarrow
Simple lift the break bar to break the wheelbarrow (
Figure 21
). Please refer to the “Install the
Battery” section on how to stop the wheelbarrow using the stopper when you are on a slope
or any other situations where you need to stop the wheelbarrow and be away.
Lifting the tray
Please refer to the “Install the Battery” section on how to life the tray correctly when installing
the battery or unloading the tray.
Securing the tray
Use the hook pre-installed on the handle to secure the tray during transportation, loaded or
unloaded (
Figure 24
). This prevent abrupt lifting of tray due to poor road conditions.
Operating the Wheelbarrow
Figure 22
Figure 24
Figure 23
