10
Do not expose power tools to rain. Do not use power tools in damp or wet location. Do not use
power tools where there is a risk of fire or explosion.
Keep children away
Do not let children touch the tool or extension cord. All visitors should be kept away from the work
area.
Store idle tools
When not in use, tools should be stored in a dry, high or locked up place, out of the reach of
children.
Do not force the tool
It will do the job better and safer at the rate of which it was intended.
Dress properly
Do not wear loose clothing or jewellery, they can be caught in moving parts. Work gloves and non-
skip footwear are recommended when working outdoors. Wear protective hair covering to contain
long hair.
Use safety glasses
Also use face or dust mask if the cutting operation is dusty.
Do not abuse the cord
Never carry the tool by the cord or yank it to disconnect it from the socket. Keep the cord away
from heat, oil and sharp edges.
Do not overreach
Keep proper footing and balance at all times.
Maintain tools with care
Keep cutting tools sharp and clean for better and safer performance.
Follow instructions for lubrication and changing accessories.
Inspect tool cord periodically and if damaged - have it repaired by an authorized
service centre. Inspect extension cords periodically and replace if damaged. Keep handles dry,
clean and free from oil.
Disconnect tools
When not in use, before servicing and when changing accessories such as blades, bits, cutters.
Use outdoor extension cords
When the tool is used outdoors, use only extension cords intended for outdoor use.
Stay alert
Watch what you are doing. Use common sense. Do not operate tool when you are tired.
Check damaged parts
If a guard or other part has been damaged, carefully check to determine that the part will operate
properly and perform its intended function. Check for alignment of moving parts, free running of
moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A
guard or other part that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated in this instruction manual. Have defective switches
replaced by an authorized service facility. Do not use the tool if the switch does not turn it on and
off.
Summary of Contents for KV2500
Page 2: ...2 1 2 ...
Page 3: ...3 3 4 5 6 ...
