16
9. Trouble shooting
Problem
Reason
Solution
Engine does not start
No power
Check power and cables
Defective safety switch
Contact local dealer
Overheat protection active
a. Work at lower depth.
b. Remove possible blockages.
c. The soil is too hard. Change the
work depth and go slowly forwards
and backwards several times. Do
not restart for 15 min.
Abnormal noise level
Blades are blocked
Stop the engine and await com-
plete stop. Remove the blockage.
Lack of grease
Contact local dealer
Loose bolts, nuts or safety
equipment.
Tighten. Contact local dealer, if
noise persists.
Abnormal vibrations
Blades broken or worn
Replace or contact local dealer
Work depth too big
Use correct work depth.
Bad results
Work depth too low
Use correct work depth.
Worn blades
Replace or contact local dealer
10. Specifications
Model
El-Tex 750
Power supply
230 Volt - 50 Hz
Watt
750 Watt
Work width
30 cm
Max. work debth
22 cm
dB(A)
93 dB(A)
Grease
Multifak EP-0 / 90306515
