13
Use one of the patterns shown when pre-
paring an area for sowing.
6. Blade
If the blades are worn or broken, they can
be replaced. Failure to maintain the
blades can cause poor results when culti-
vating, or overload the motor. Always
wear gloves when working near the
blades.
Blades can only be replaced as a set.
When changing blades, remove the first
split pin and the outer blade, followed by
the inner split pin to remove the inner
blade (fig. 6).
7. Lubrication
The gears are factory lubricated. Check level
regularly.
Lie machine on its left side. Clean around the filler hole to avoid
dirt getting into the machine when removing the screw.
Fill with Multifak EP-0 grease up to the bottom edge of the hole.
Replace screw.
Item number : 90306515
