10
Using the kick starter
Turn the ignition key to A. Take the scooter off from the side stand.
Make sure the scooter is placed on the main stand on a hard and even surface.
Activate the left brake and press the front part of the seat with your right hand.
Step hard on the kick starter with your right foot. Repeat this if the engine does not start at the
first try.
Driving the scooter
Correct driving influences:
-
your safety
-
the life time of the scooter
-
the use of fuel
1.
After starting the engine you activate the left brake while pushing the scooter forward with
your right hand placed on the rear of the scooter to get it down from the main stand.
2.
Keep both hands on the handles. Climb the scooter from the left side. Keep your left foot
on the ground. Check the traffic before driving.
3.
Release the brake and turn the throttle slowly to start. You control the speed by turning
the throttle more or less.
Battery and fuse
The battery is placed under the footrest. It is a 12 V 7 Amp battery.
Winter storage: Always store the battery in a frost free room. It should be fully charged. First
remove the – pole and then the + pole. Always charge the battery in a well-ventilated room.
Use distilled water for refilling the battery.
The fuse is placed next to the battery. It is a 15 Amp fuse. If the fuse is broken you should replace
it. If the fuse blows repeatedly you should contact your authorised dealer.
Turn out the pedal before use.
