TEXAS ROTO-CLEANER
User manual
1
GB
Assemble:
Dismount the lance part from the high pressure cleaner (keep the extension unit).
Mount the new extension unit (1) and the patio cleaner (2). Connect pieces and
twist them to the left until they lock.
Operation:
Let the patio cleaner do the work. Don’t press it hard towards the ground,
but let it slide from side til side. The water pressure will give a hovering effect,
which is most effectful, when the water pressure is adjusted to the max.
Never let the patio cleaner slide over edges.
It might result in damage to the cleaner.
2
Always perform a small test before you start cleaning larger areas.
Adjustment:
The water pressure against the ground can be adjusted by raising/
lowering the propeller with the water outlets. Turn off the machine
first, and pull out the handle (3). Adjust the height and press the
handle (3) back again.
3
It is very important, that the handle (3) is pressed correctly
back, so that the adjustment is locked before you use the
cleaner again.
The floor cleaner must not be exposed to frost during storage.
Texas A/S - Knullen 2 - DK-5260 Odense S - Tel. 45 6395 5555 - www.texas.dk
2004/1
